Modular Cutting System
Many processing and cutting tasks are as varied as the materials themselves. With the MBS-System it is possible for you to combine more than 130 standard components together to fit your requirements. To this end we can offer you a cutting machines that fit flexibly and individually with customers’ requirements and are available in the shortest time with practically no development being necessary.
Just like building blocks, the appropriate elements are selected and applied. Elements like the type and number of cutting tools, length of the transport conveyor (from 200mm up to 800mm) and width (from 200mm up to 400mm), control system, feed-in device, working direction, nature of the transport conveyor surface covering and the support framework: all these are tailored to the needs and demands of the customer and the materials. Thanks to this flexibility, there are virtually no limits to meeting and satisfying your requirements.
The use of standard components makes it possible to create the MBS machines very quickly with very little further development. Modular cutting machines are thus not only matched to processing requirements but are also extremely economical and efficient. In addition, all MBS machines are equipped as standard to be fully integrated with peripheral systems such as take-off and feed mechanisms, throw-off devices and winders, printers and marking units. The following examples demonstrate the diversity of the modular sectioning system: |
 | MBS automat with following features:
Cutting method: Die cut Belt feeder: 400 mm (15.75") length, 200 mm (3.94") width Material height max: 30 mm (1.18") Control: Microcontroller system Additional features: Welded steel frame, saftey feed-in, outlet belt | |
| ||
| MBS automat with following features:
Cutting method: Drawing cut Belt feeder: 400 mm (15.75") length, 100 mm (7.87") width Material height max: 30 mm (1.18") Control: PLC control Additional features: machining up to four materials, welded steel frame, safety input, saftey output, run-off belt | |
| ||
 | MBS automat with following features:
Cutting method: Shear cut Belt feeder: 400 mm (15.75") length, 200 mm (7.87") width Material height max: 30 mm (1.18") Control: PC control Additional features: Equipped with two ink jet printers, End-sensing for increased tolerance request | |
| ||
 | MBS automat with following features:
Cutting method: Die cut Belt feeder: 100 mm (3.94") length, 200 mm (7.87") width Material height max: 30 mm (1.18") Control: S7 control Additional features: Equipped conveyer, material pusher and collecting tray | |
| ||
 | MBS automat with following features:
Cutting method: Eccentric cut Belt feeder: 400 mm (15.75") length, 200 mm (7.87") width Material height max: 30 mm (1.18") Control: PC control Additional features: Equipped with one ink jet printer, conveyer | |
| ||
 | MBS automat with following features:
Cutting method: Hot cut Belt feeder: 200 mm (7.87") length, 200 mm (7.87") width Material height max: 30 mm (1.18") Control: Microcontroller system Additional features: Equipped with safety input, temperature controler for hot cut | |
| ||
 | MBS automat with following features:
Cutting method: Shear cut Belt feeder: 200 mm (7.87") length, 400 mm (15.75") width Material height max: 80 mm Control: Microcontroller system Additional features: Segmented outlet belt, roller train with centering adjustment of the material width | |
| ||
| MBS automat with following features:
Cutting method: Shear cut Combined belt & roller feed: 200 mm (7.87") length, 100 mm (3.9.4") width Material height max: 30 mm (1.18") Control: Microcontroller system Additional features: Special equipment for machining of thin materials (e.g. foils) | |
| ||
 | MBS automat with following features:
Cutting method: 3 cutting tools
Belt feeder: 400 mm (15.75") length, 100 mm (3.94") width Material height max: 30 mm (1.18") Control: PLC control Additional features: Waste disposal in collection box, welded steel frame
| |
| ||
 | More details about these products
|