Metzner CRC Series

Automatic cable ring winders with controlled function sequence

Long cable wires frequently have to be wound up into a ring after assembly. The Metzner CRC series cable ring winders have been developed to do this. Metzner CRC 350 – The cable ring winder with synchronous control, for cable rings of up to 350 mm outer diameter. The cable wires are automatically fed into the winding mandrels through a guide tube, and the winding process starts and stops program-controlled. After completion, the mandrels are lowered automatically, the protection cover opens, and the finished cable ring can be removed.

The Metzner CRC 450 Duo is an automatic cable ring winder with synchronous control for cable rings of up to 450 mm outer diameter. The operator uses the two winding plates to remove the finished cable ring, while the machine winds the next cable on the other plate. Winding therefore takes place without any waiting time. With the Metzner CRC 750, you can wind cable coils with an outer diameter of up to 750 mm. With a permissible winding weight of up to 80 kg and a winding inner diameter of 250 – 600 mm, the CRC 750 is also equipped for heavy-duty requirements and can handle the entire cable spectrum of the AM 5000 series of up to 35 mm cable diameter. All cable ring winders can also be operated as single units, independent of a cable processing machine for other winding tasks. Here the processing steps are activated by a foot switch. The foot switch controls the following functions: Closing the protection cover, starting the winding process, ending the winding process and opening the protection cover.

Synchronous operation with Metzner cable processing machines

Metzner cable ring winders of the CRC series enable a synchronous and automatic winding process to enable an optimised winding result. For further insights into the how the CRC series works, please see our product videos.