Metzner Maschinenbau GmbH
Suche / Search
Produktbeschreibung:

Traveling circular knife

The travelling circular knife machine CCM 6 cuts rigid profiles and tubes accurately to length. The CCM 6 achieves very long processing times of several seconds for excellent "final trim quality" thanks to a standard servo linear drive for the tool carrier, and at the same time extremely short cycle times of less than one second for machining short parts at high line speeds. Added to this is the servo linear drive for circular knife feed with different feed speeds for different material sections, e.g. a gentle material penetration or knife exit with low feed to reduce burr formation.

High speed ranges

As far as the knife speed is concerned, we offer you outstanding possibilities of alternatively 2,000 – 6,000 rpm or 4,000 – 12,000 rpm. This means that there are no limits to the use of various types of circular knives, including clamping and grinding in continuous operation. Our product videos will give you an insight into the machining process.

Kategorieslider-ID: liste_baureihe_CCM
Produkt Feature 1 Titel: Exchangeable tools
Produkt Feature 1 Beschreibung:

The CCM 6 offers a powerful platform for the complete in-line machining of rigid plastic profiles, which can also be equipped with quick-change tools or drilling and milling modules depending on the task.

Produkt Feature 1 Icon:
Produkt Feature 1 Bild:
Produkt Feature 2 Titel: Additional cutting tool
Produkt Feature 2 Beschreibung:

The circular cutting machine CCM 6 is prepared for the use of an additional punching tool. This turns the Metzner circular cutting machine into a real all-rounder, which can also be ideally used for materials without steel reinforcement.

Produkt Feature 2 Icon:
Produkt Feature 2 Bild :
produkt Subfeature 1 Titel: Intelligent gap detection
Produkt Subfeature 1 Beschreibung:

The optional gap detection system positions the cut exactly in the gap of the metal carrier, thus ensuring a burr-free cut for steel-reinforced profiles. This improves the cutting quality and the service life of the circular knife.

Produkt Subfeature 1 Icon:
Produkt Subfeature 2 Titel: Profile clamp
Produkt Subfeature 2 Beschreibung:

The profile clamp ensures optimum fixing of the plastic profile during the cut. This decreases the chance of the profile being distorted. The profile clamp also allows complex profile contours to be cut at a very high cutting quality.

Produkt Subfeature 2 Icon:
Produkt Subfeature 3 Titel: Cutting out defective areas
Produkt Subfeature3 Beschreibung:

With automatic quality control, this option provides an independent waste cut for faulty material areas and prevents the processing of parts that do not meet the specification.

Produkt Subfeature 3 Icon:
Produkt Download 1 Titel: Metzner Product Catalogue
Produkt Download 1:

Metzner CCM 6

Traveling circular knife

The travelling circular knife machine CCM 6 cuts rigid profiles and tubes accurately to length. The CCM 6 achieves very long processing times of several seconds for excellent "final trim quality" thanks to a standard servo linear drive for the tool carrier, and at the same time extremely short cycle times of less than one second for machining short parts at high line speeds. Added to this is the servo linear drive for circular knife feed with different feed speeds for different material sections, e.g. a gentle material penetration or knife exit with low feed to reduce burr formation.

High speed ranges

As far as the knife speed is concerned, we offer you outstanding possibilities of alternatively 2,000 – 6,000 rpm or 4,000 – 12,000 rpm. This means that there are no limits to the use of various types of circular knives, including clamping and grinding in continuous operation. Our product videos will give you an insight into the machining process.

Special features

Exchangeable tools

The CCM 6 offers a powerful platform for the complete in-line machining of rigid plastic profiles, which can also be equipped with quick-change tools or drilling and milling modules depending on the task.

Additional cutting tool

The circular cutting machine CCM 6 is prepared for the use of an additional punching tool. This turns the Metzner circular cutting machine into a real all-rounder, which can also be ideally used for materials without steel reinforcement.

Intelligent gap detection

The optional gap detection system positions the cut exactly in the gap of the metal carrier, thus ensuring a burr-free cut for steel-reinforced profiles. This improves the cutting quality and the service life of the circular knife.

Profile clamp

The profile clamp ensures optimum fixing of the plastic profile during the cut. This decreases the chance of the profile being distorted. The profile clamp also allows complex profile contours to be cut at a very high cutting quality.

Cutting out defective areas

With automatic quality control, this option provides an independent waste cut for faulty material areas and prevents the processing of parts that do not meet the specification.

Similar Products

Downloads

All relevant Downloads.

Metzner Product Catalogue

PDF 6736 KB

Any questions?

We would be delighted to assist and advise you to find the right solution.

 

Contact

Get in touch with us 

 

HOW TO FIND US

Messerschmittstr. 30 in 89231 Neu-Ulm